Dynamic Mechanical analysis

This book contains information obtained from authentic and highly regarded sources. The book attempts to give the chemist, engineer, or material scientist a starting point to understand where and how dynamics mechanical analysis can be applied, how it works (with out burying the reader in calculations), and what the advantages and limits of the techniques are.

1. An Introduction to Dynamic mechanical Analysis

2. Basic Rheological Concepts: Stress, Strain, and flow

3. Rheology Basi0c: Creep-Recovery and Stress Relaxation

4. Dynamic testing

5. Time-temperature Scans: Transision of polymers

6. Time and Temperature Studies: Thermosets

7. Frequency scans

8. DMA application in a real Problems: Guidelines

http://rapidshare.de/files/23008915/Menard_-_Dynamic_Mechanical_Analysis-A_Practical_Introduction__CRC_1999__4AH.rar

Advance Vehicle Technology 2nd edition

Advance Vehicle Technology is a comprehensive and thorough description of vehicle bodies and components and has been updated to provide additional material on subjects such an antilock breaking, vehicle aerodynamics, tire tread design advances, electronically controlled anti-vibration engine mountings and transport refrigeration. Advanced Vehicle Technology 2nd edition has depth coverage, detailed illustrations and fluent and precise style which are the outstanding features of the book. This second edition aimed at or designed for automotive engineers and technicians used as a textbook that was a great help to them.

1. Vehicle Structure
2. Friction Clutch
3. Manual gearboxes and overdrives
4. Hydrokinetic fluid couplings and torque converters
5. Semi- and fully automatic transmission
6. Transmission bearings and constant velocity joints
7. Final drive Transmission
8. Tyres
9. Steering
10. Suspension
11. Break System
12. Air operated power break equipments and vehicle retarders
13. Vehicle Refrigeration
14. Vehicle body aerodynamics

http://rapidshare.de/files/21088382/HEISLER__H.__2002_._Advanced_Vehicle_Technology__2nd_ed._.rar

Fluid Catalytic Cracking Handbook 2nd edition

This second edition fulfills the goal of discussing issues related to the FCC process. This provides a practical “transfer of experience” to the Readers' knowledge. Each Chapters reviewed carefully for accuracy and completeness. "Fluid catalytic cracking (FCC) continues to play a key role in an integrated refinery as the primary conversion process. A new chapter supplies valuable recommendations for optimizing the performance of cat cracker operations.

1. Process description
2. FCC Feed Characterization
3. FCC Catalysts
4. Chemistry of FCC Reactions
5. Unit Monitoring Control
6. Products And Economics
7. Project Management And Hardware Design
8. Troubleshooting
9. Debottlenecking and Optimization
10. Emerging Tends IN Fluidized Catalytic Cracking

http://rapidshare.de/files/20907133/SADEGHBEIGI__R.__2000_._Fluid_Catalytic_Cracking_Handbook__2nd_ed._.rar

Shale Shakers and Drilling Systems

The books include an introduction to Drilling Fluids and Solid Control Treatment, Drilling Fluid System arrangements, a hand Book on each Piece of mechanical Solids control equipment and accessory systems. The AADE Steadfastly Supported the Rewrite Effort for the new Shale Shaker Handbook and was Responsible for Expanding the Handbook into this textbook on this Solids control Equipment. It is greatly expanded from initial book that precipitated the endeavor. This book is written for a board audience: derrickmen and drilling supervisors will find Practical Help. Drilling engineers will find design and technical data to assist in understanding Drilled solid Management. The book also Contains information about Dilution, Calculating Drilled Solids concentration in a discard Stream ( or in a drilling Fluid), Dewatering, Centrifugal Pumps, Electric Motors, Clear, Specific Durations For rig Personnel.

1. Introduction

2. The Role Of Shale shaker

3. Shale Shaker Design

4. Shaker application

5. Shaker User’s Guide

6. Shake shaker Screen

7. Solid Control Equipment

8. Dilution

9. Cut Points

10. Calculating Drilled Solid Concentrations

11. Centrifugal Pumps

12. Electronic Motors

13. Solid Dewatering

http://rapidshare.de/files/20906792/ROBINSON__L.__1999_._Shale_Shakers_and_Drilling_Fluid_Systems.rar

WHAT WENT WRONG? 4th edition

This book part of a required reading program for all engineers, as part of our company's process safety program. Anyone involved in chemical or petroleum operations, will benefit greatly from the wisdom that can be gained by learning from other's mistakes. This allows for easy short term reading periods appropriate for training classes or casual reading. The book recounts numerous actual process plant accidents and incidents, includes causes and effects, and avoidance and mitigation practices. This book help keep memories alive. Moreover, it is concerned with the immediate technical causes of accidents and the changes in design and procedures needed to prevent them from happening again.

1. Preparation for maintenance

2. Modifications

3. Accidents Caused by Human error

4. Labeling

5. Storage tanks

6. Stacks

7. Leaks

8. Liquefied flammable Gases

9. Pipe and Vessel Failure

10. Other Equipment

11. Entry to Vessels

12. Hazard of Common Material

13. Tank Trucks and Cars

14. Testing of trips and other Protective Systems

15. Static Electricity

16. Materials of Construction

17. Operating Methods

18. Reverse Flow and Other Unforeseen Deviations

19. I Didn’t Know that

20. Problem With Computer Control

21. Inherently Safer Design

22. Reactions-Planned And Unplanned

http://rapidshare.de/files/20888033/KLETZ__T._A.__1998_._What_Went_Wrong_-_Case_Histories_of_Process_Plant_Disasters__4th_ed._.rar

Chemical Engineering Solution Volume 4

This book contains answers to the more challenging questions posed at the end of each chapter at the main text. This volume from the author Coulson and Richardson series in Chemical Engineering contains full worked solution for problems in Volume 1. This volume contains detail solutions for volume 1 questions. The book is a successor to the old volume 4 which satisfy the demand as far as the problems in Volume 1 are concerned. It should appreciated the most engineering problems do not have unique solutions. There is a section of problems, which the reader invited to solve in order to consolidate his/her understanding of the principles and to gain a better appreciation of the order of magnitude of the quantities involved.

1. Units and Dimensions
2. Flow of Fluids­­-energy and momentum relationships
3. flow in pipes and Channels
4. Flow of Compressible fluids
5. Flow of multiphase mixtures
6. Flow and pressure Measurement
7. Liquid Mixing
8. Pumping of Fluids
9. Heat Transfer
10. Mass Transfer
11. The Boundary layer
12. Momentum, Heat and mass transfer
13. Humidification and water cooling

http://rapidshare.de/files/20906246/RICHARDSON__J._F.__2001_._Coulson___Richardson_s_Chemical_Engineering_Volume_4.rar

Centrifugal Pumps Design & Application 2nd edition

The book produce an easy to read, easy to understand, practical text book stressing hydraulic design, that could be of hands-on intended use for the pump designer, student, and rotating equipment engineer. It is essential to understand the sources of pump noise and causes of vibration that result from installation, application, cavitations, pulsation, acoustic resonance. This book best for pump user, pump designer, rotating-equipment engineer, and student. This bridges the gap between scholarly texts and standard engineering design guides. A practical reference presents both design criteria and application guidelines.

1. Introduction
2. Specific Speed and Modeling Laws
3. Impeller Design
4. General Pump Design
5. Volute Design
6. Design of Multi-stage Casing
7. Double-suction pumps and side-suction Design
8. NPSH
9. Vertical Pumps
10. Pipeline, Water flood, and C0z pumps
11. High Speed Pumps
12. Double Case pumps
13. Slurry Pumps
14. Hydraulic Power Recovery Turbines
15. Chemical pumps-metallic and Nonmetallic
16. Shaft Design and Axial Thrust
17. Mechanical Seals
18. Vibration and Noise in Pumps
19. Alignment
20. Rolling Element Bearings and Lubrication
21. Mechanical seal Reliability

http://rapidshare.de/files/20892293/LOBANOFF__V._S.__1992_._Centrifugal_Pumps_-Design and application 2nd ed rar

Chemical Process Safety

This book offers sound advice on identifying chemical process hazard analysis, training, audits, and guidelines addressing the elements of OSHA’s Process safety Management law. This contains two new chapters with many new incidents and vivid photos for analysis and study. The book attempt to interpret three sections of the standards that deal with “Mechanical Integrity,” “Management of Change,” and “ incident Investigation” based on nearly a quarter century of experience in process safety practice, significant literature studies, Consulting associates at other plants, and from regulators. The information of this book came from a number of sources, including Stories from my experiences in the now-defunct Louisiana loss prevention Association; students in the AIChE’s “Chemical plant accidents” Course; Member of the leak area of Industries McNeese State University Engineering Department’s OSHA Support meetings; and coworkers, friends and Literature.

1. Perspective, Perspective, Perspective

2. Good intentions

3. Focusing on water and steam: the Ever-present and Sometimes evil twins

4. Preparation for maintenance

5. Maintenance-induced Accidents and process piping Problems

6. One-minute Modifications: Small, Quick in Plant Can Create Bad Memories

7. Failure to use, Consult, or Understand Specification

8. “Imagine If” Modification and practical Problem Solving

9. The role of Mechanical Integrity In Chemical Process safety

10. Effectively managing change within the chemical Industry

11. investigating and sharing near-misses and unfortunate incident

12. Sources helpful information for chemical Process Safety

http://rapidshare.de/files/20907573/SANDERS__R._E.__1999_._Chemical_Process_Safety_-_Learning_from_Case_Histories.rar

Crystallization process system

Crystallization Process Systems tells about a clear and knowledge view and an overview of crystallization. It provides an ideal lead-in to more specialized works such as Crystallization and Solid-Liquid Separation. This gives a clear, concise, balanced and up to date presentation of crystallization and solid-liquid separation of the crystalline product. The book presented an information in a coherent, concise and logical sequence based on the fundamentals of particulate crystallization processes as systems. The focus of the book is dealing with related unit operations as far as is necessary. The book comprised the earlier undergraduate taught topics together with some enhance Material; mainly covering the more advanced and researched topics and a great help to those undertake Crystallization process design projects.

1. particulate crystals characteristics

2. Fluid particle Transport process

3. Crystallization principle and techniques

4. Solid-liquid separation processes

5. Crystal formation and breakage

6. crystal agglomeration and adsorption

7. Crystallizer design and performance

8. Crystallizer mixing and Scale-up

9. Design of Crystallization Process System

http://rapidshare.de/files/20887505/JONES__A._G.__2002_._Crystallization_Process_Systems.rar

Adhesion Science and Engineering Vol 1 and 2

The Mechanics of Adhesion

Adhesion Science and Engineering dealt in this volume with the mechanics of the adhesive bonds and the rheology of adhesive. This volume focuses attention on the contribution of mechanics principles and solutions to understanding the fabrication, design, analysis, and testing of Adhesive Bonding, this volume offers a comprehensive overview of the current understanding of stresses, deformation, and fracture parameters associated with a range of adhesive bonds. The book provides an overview of this board interdisciplinary field.

1. fundamentals of stress transfer in bonded system
2. fracture mechanics and singularities in bonded system
3. Energy Analysis and Adhesion
4. Strength of lap shear joints
5. strength of butt and sharp-cornered joins
6. Mechanical testing adhesive joints
7. measurement and analysis of the fracture properties of Adhesive properties of Adhesive
8. the Mechanics of peel test
9. the mechanics of Coatings
10. Stresses and Fracture of elastomeric bonds
11. Crack path Selection in adhesively bonded joints
12. rheology of adhesion science and technology
13. Effect of rhaology on PSA performance
14. Tack
15. Contact Mechanics
16. Measurement Method for fiber-matrix adhesion in composite
17. the Dorability of Adhesive joints
18. Ultrasonic inspection f Adhesive Bonds
19. the design of Adhesive Bonded joins

Surfaces, Chemistry & Application

This volume deals with other two disciplines that make up adhesion science, surfaces and chemistry. In addition, this volume describes several applications of adhesion science and engineering. The volume begins with discussions of surface science and how does they relate to adhesion scence.

1. Semi-empirical strategies for Predicting adhesion
2. Direct Estimation of the adhesion of solid polymers
3. Particle adhesion
4. Surface mechanical measurements at the nanoscale
5. Micro-mechanical processes in adhesion and fracture
6. Surface analysis in adhesion science
7. Surface roughness in Adhesion and fracture
8. Diffusion and autohesion
9. Compiling agents: chemical bonding at interfaces
10. priming to improve adhesion
11. pressure Sensitive adhesion
12. Release coating for pressure sensitive Adhesive
13. Rubber base adhesives
14. Fundamentals aspects in Adhesion in technology in silicones
15. Hot melt Adhesive
16. Chemistry and technology of polyurethane adhesive
17. the chemistry of bis-maliemides used in adhesive
18. Structural acrylics
19. Cyanoacrylate instant Adhesive
20. Phenolic resins: some chemistry, technology and history
21. surface treatments of metal adherends
22. electron beam process Adhesives and their use in composite
23. Wood Adhesives
24. tissues Adhesives and Hemostats: new tools for surgeon
25. Application of Adhesives in aerospace

http://rapidshare.de/files/20904876/POCIUS__A._V.__2002_._Adhesion_Science_and_Engineering__2_vols._.rar

Environmental Control in Petroleum engineering

This extensively researched book assembles a tremendous amount of practical information to help reduce and control the environmental consequences of producing and processing petroleum and natural gas.This book shows you how to plan and manage production activities to minimize and even eliminate some environmental problems without severely disrupting operations. Other topics include United States federal environmental regulations, sensitive habitats, major U.S. chemical waste exchanges, and offshore releases of oil. This book reviews the remedial technologies available. The book has been organized and written for a target audience having little or no training in the environmental issues facing the petroleum industry. This book has involved from course notes developed by the author for use in undergraduate and graduate classes.

1. Introduction to environmental control in the petroleum industry

2. Drilling and Production Operations

3. the impact of drilling and production operation

4. Environmental transport of petroleum wastes

5. Planning for environmental protection

6. Waste Treatment Methods

7. Waste Disposal Methods

8. Appendix A: environmental Regulations

9. Appendix B: Sensitive Habitats

http://rapidshare.de/files/20906202/REIS__J._C.__1996_._Environmental_Control_in_Petroleum_Engineering.rar

Computational flow modeling for Chemical Reactor Engineering

This book is intended for practicing chemical engineers working in industry, chemical engineering scientist and research students working in the area of reactor engineering to get information and to organize and facilitate the central task of reactor engineer. This book introduces the contents that to be covered in detail in subsequent chapters. It may use as basic resource for making appropriate decisions about investment in the application of CFD to reactor engineering. The advantage of Computational flow modeling (CFM) may reduce develop time, leading to reduce time to market, shorter payback time and better cash flow. It is however, necessary to adapt CFD techniques and to develop computational flow modeling approach to apply them to chemical reactor engineering. This book was design with the intention of assisting practicing engineers and researches to develop such approach.

Contents

1. Reactor Engineering and Flow Modeling

2. Mathematical Modeling of flow Processes

3. Turbulent Flow Processes

4. Multiphase Flow Processes

5. Reactive Flow Processes

6. Numerical Solution of model Equations

7. Numerical Solution of Complex Flow Models

8. Computational tools For simulating flow Processes

9. Flow Modeling for Reactor Engineering

10. Stirred Reactors

11. Bubble Column Reactors

12. Fluidized Bed Reactors

13. Fixed Bed And other Types of Reactors

14. Epilogue

http://rapidshare.de/files/20905047/RANADE__V._V.__2001_._Computational_Flow_Modeling_for_Chemical_Reactor_Engineering.rar 7.53 MB